Skip to main content

ASU Electronic Theses and Dissertations


This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.

In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.

Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.


Contributor
Subject
Date Range
2010 2019


The research titled “A Comparative Analysis of Museums in Paris, Barcelona, and Phoenix” critically reviews six museums in three culturally diverse countries. This research looks at features within marketing, space, and branding which may or may not differ depending on socio-cultural factors, histories, traditions, etc. in Spain, France, and the United States. A conclusion is formed around the identity of each museum through the variables of marketing, space, and branding. Dissertation/Thesis

Contributors
Weiler, Libby A., Bernardi, Jose, Fehler, Michelle, et al.
Created Date
2016

This study examines the applicability of high dynamic range (HDR) imagery as a diagnostic tool for studying lighting quality in interior environments. It originates from the limitations in lighting quality assessments, particularly from the problematic nature of measuring luminance contrast--a significant lighting quality definer. In this research, HDR imaging method is studied systematically and in detail via extensive camera calibration tests considering the effect of lens and light source geometry (i.e. vignetting, point spread and modulation transfer functions), in-camera variables (i.e. spectral response, sensor sensitivity, metering mode,), and environmental variables (i.e. ambient light level, surface color and reflectance, light source …

Contributors
Tural, Mehmedalp, Bryan, Harvey, Kroelinger, Michael D, et al.
Created Date
2011

The main objective of this project was to create a framework for holistic ideation and research about the technical issues involved in creating a holistic approach. Towards that goal, we explored different components of ideation (both logical and intuitive), characterized ideation states, and found new ideation blocks with strategies used to overcome them. One of the major contributions of this research is the method by which easy traversal between different ideation methods with different components were facilitated, to support both creativity and functional quality. Another important part of the framework is the sensing of ideation states (blocks/ unfettered ideation) and …

Contributors
Mohan, Manikandan, Shah, Jami J, Huebner, Kenneth, et al.
Created Date
2011

As the designer is asked to design, create, or simply solve a problem, many factors go into that process. It generally begins with defining the scope or problem that undergoes an iterative process utilizing different tools and techniques to generate the desired outcome. This is often referred to as the design process. Notwithstanding the many factors that influence this process, this study investigates the use of theory for behavior change and its effect on the design process. While social behavioral theories have been extensively discussed in the realm of design, and a well-developed body of literature exists, there is limited …

Contributors
AlWazzan, Aysha, Mejia, G. Mauricio, Sanft, Alfred, et al.
Created Date
2019

Schools all around the country are improving the performance of their buildings by adopting high performance design principles. Higher levels of energy efficiency can pave the way for K-12 Schools to achieve net zero energy (NZE) conditions, a state where the energy generated by on-site renewable sources are sufficient to meet the cumulative annual energy demands of the facility. A key capability for the proliferation of Net Zero Energy Buildings (NZEB) is the need for a design methodology that identifies the optimum mix of energy efficient design features to be incorporated into the building. The design methodology should take into …

Contributors
Islam, Mohammad Moshfiqul, Reddy, T. Agami, Bryan, Harvey J., et al.
Created Date
2016

A post occupancy evaluation (POE) was conducted at the Ngeruka Health Center (NHC) in the Bugesera District of Rwanda. The POE was limited to the education spaces within the health center, its participants, and staff. A POE is a combination of methods both quantitative and qualitative to determine user satisfaction and whether the design intent of the built environment was met. In rural Rwanda where healthcare facilities are scarce and people become seriously ill from preventable diseases, help is needed. The smallest injuries become life threatening. Healthcare facilities and providers must develop approaches that stop these minor illnesses and diseases …

Contributors
Wakelam, Sheila M., Takamura, John, Patterson, Mark, et al.
Created Date
2015

The geometric growth in the integrated circuit technology due to transistor scaling also with system-on-chip design strategy, the complexity of the integrated circuit has increased manifold. Short time to market with high reliability and performance is one of the most competitive challenges. Both custom and ASIC design methodologies have evolved over the time to cope with this but the high manual labor in custom and statistic design in ASIC are still causes of concern. This work proposes a new circuit design strategy that focuses mostly on arrayed structures like TLB, RF, Cache, IPCAM etc. that reduces the manual effort to …

Contributors
Maurya, Satendra Kumar, Clark, Lawrence T, Holbert, Keith, et al.
Created Date
2012

In the United States, seasonal influenza is responsible for enormous medical costs and lost earnings as well as thousands of deaths. Medical masks are effective non-pharmaceutical preventions for minimizing the spread of illness in the event of an influenza outbreak. However, people in the United States rarely wear face masks the way many people in Asian countries do. In a previous study of public response to the 2009 influenza A H1N1 pandemic, 71% of United States respondents supported the recommendation to wear a mask during the flu outbreak, while only 8% of respondents reported they wore a mask in public …

Contributors
Hung, Yu-Wen, Herring, Donald, Velasquez, Joseph, et al.
Created Date
2018

Study in user experience design states that there is a considerable gap between users and designers. Collaborative design and empathetic design methods attempt to make a strong relationship between these two. In participatory design activities, projective `make tools' are required for users to show their thoughts. This research is designed to apply an empathetic way of using `make tools' in user experience design for websites clients, users, and designers. A magnetic wireframe tool has been used as a `make tool', and a sample project has been defined in order to see how the tool can create empathy among stakeholders. In …

Contributors
Eslamifar, Ali, Heywood, William, Walker, Erin, et al.
Created Date
2014

As digital images are transmitted over the network or stored on a disk, image processing is done as part of the standard for efficient storage and bandwidth. This causes some amount of distortion or artifacts in the image which demands the need for quality assessment. Subjective image quality assessment is expensive, time consuming and influenced by the subject's perception. Hence, there is a need for developing mathematical models that are capable of predicting the quality evaluation. With the advent of the information era and an exponential growth in image/video generation and consumption, the requirement for automated quality assessment has become …

Contributors
Kannan, Vignesh, Sohoni, Sohum, Ren, Fengbo, et al.
Created Date
2016

Starting from 21st century BC, China has had strong but isolated philosophies for making things, which dominated the style and spirit of Chinese design. With globalization, however, contemporary Chinese design fell under the influence of Western design including design practice, design theory, and education. Today, by improving capacity for independent innovation, and creating its own brand, China may be able to change its current practices of production that are defined by high consumption of resources, high pollution and low value-add. The search for high-quality Chinese design, which is both original and innovative with unique and identifiable features, has become a …

Contributors
Ren, Liqi, Giard, Jacques, Boradkar, Prasad, et al.
Created Date
2018

ABSTRACT Nursing physical fatigue is a critical issue that may lead to degradation of care delivery and ultimately result in medical errors. This issue is equally relevant due to the looming shortage of nurses, which has been linked to the physical demands and potential occupational hazards intrinsic to the profession; as well as to the graying of the nursing workforce who experiences gradual loss of strength and agility that accompanies aging as time in the career advances. In a hospital Emergency Department, the level of nursing physical fatigue can potentially reach its threshold in light of challenging workloads, scope of …

Contributors
Shakman, Karen, Bender, Diane, Stein, Morris, et al.
Created Date
2011

Conceptual design stage plays a critical role in product development. However, few systematic methods and tools exist to support conceptual design. The long term aim of this project is to develop a tool for facilitating holistic ideation for conceptual design. This research is a continuation of past efforts in ASU Design Automation Lab. In past research, an interactive software test bed (Holistic Ideation Tool - version 1) was developed to explore logical ideation methods. Ideation states were identified and ideation strategies were developed to overcome common ideation blocks. The next version (version 2) of the holistic ideation tool added Cascading …

Contributors
Narsale, Sumit Sunil, Shah, Jami J, Davidson, Joseph K, et al.
Created Date
2014

In geographical locations with hot-arid climates, sun control in buildings is one primary problem to solve for the building envelope design. Today's technological advances in building science bring with them the opportunity to design dynamic façade systems for sun radiation control and daylighting. Although dynamic systems can become an attractive visual element, they can be costly and challenging to maintain for building owners. Alternatively, fixed solar-shading systems can be designed to create dynamism in the façade of the building, while providing similar functionalities for sun control. The work presented in this project focuses on the use of a visual scripting …

Contributors
Grijalva, Karla, Bryan, Harvey J, Griffiths, Jason, et al.
Created Date
2012

This research aims to investigate the effect of campus courtyards on students’ satisfaction with education. It will look into two different types of courtyard within the Arizona State University. One courtyard space has more elements and attributes of biophilic design and the other has less. In addition, this paper will provide guidelines for designing courtyards that would improve student’s satisfaction with education. The Methodology used is survey handouts to students after the researcher selects the two types of courtyards by observation. The participant in this study are randomly picked young adult college students (n=60). The results indicate a positive effect …

Contributors
Naseef, Rawan, Brunner, Lori, Brooks, Kenneth, et al.
Created Date
2019

In this action research, the need for high schools to embrace a pedagogical shift to teaching 21st century computer and online literacy skills is investigated. This study explored areas of secondary and higher education, technology usage, and online pedagogies, 21st century skill frameworks, and brain function as they pertain to learning and decision-making, with the aim of comprehending the differing high school levels of preparedness for college in regards to 21st century skills. Through literature reviews, a research was designed to further explore the specific areas of a discovered gap in high school students' 21st century skills for college. Pre- …

Contributors
Horn, Timothy, Patel, Mookesh, Giard, Jacques, et al.
Created Date
2015

The humans-food relationship is a 2.5 million year old, symbiotic connection of “living together” which encouraged a “system of communication up and down the food chain” (Pollan, 2008). (Reardon, 2015). Many researchers agree that this connection is a critical foundation for a beneficial relationship with food and engaging in healthy eating behaviors (McKeown, 2010; Neumark-Stainer et al., 2007; Ristovski-Slejepcevic et al., 2008; Simontacchi, 2007). Against the backdrop of a steadily increasing obesity rate and associated spending, it is critical to approach this issue from a systematic perspective such as understanding the powers that impact the consumer-food relationship (Aronne and Havas, …

Contributors
Plattner, Lainie, Takamura, John, Heywood, William, et al.
Created Date
2015

The main objective of this project was to create a framework for holistic ideation and investigate the technical issues involved in its implementation. In previous research, logical ideation methods were explored, ideation states were identified, and tentative set of ideation blocks with strategies were incorporated in an interactive software testbed. As a subsequent study, in this research, intuitive methods and their strategies were investigated and characterized, a framework to organize the components of ideation (both logical and intuitive) was devised, and different ideation methods were implemented based on the framework. One of the major contributions of this research is the …

Contributors
Chen, Ying, Shah, Jami, Huebner, Kenneth, et al.
Created Date
2012

When cartographers and graphic designers create maps they choose typefaces. Often, serif and sans serif typefaces are paired together to represent different information on a map. Typefaces have a communicated tone and choosing the correct typeface combination to send the intended message can be challenging. The purpose of this study was to create an analysis of the aesthetic characteristics of typeface pairings to assist map creators when choosing typefaces. An online survey was utilized to collect responses from graphic designers who have been trained in at least one year or more in design from a higher education institution. There were …

Contributors
Finden, Nathan, Ralston, Laurie, Carrasquilla, Christina, et al.
Created Date
2018

Stroke is a leading cause of disability with varying effects across stroke survivors necessitating comprehensive approaches to rehabilitation. Interactive neurorehabilitation (INR) systems represent promising technological solutions that can provide an array of sensing, feedback and analysis tools which hold the potential to maximize clinical therapy as well as extend therapy to the home. Currently, there are a variety of approaches to INR design, which coupled with minimal large-scale clinical data, has led to a lack of cohesion in INR design. INR design presents an inherently complex space as these systems have multiple users including stroke survivors, therapists and designers, each …

Contributors
Baran, Michael, Rikakis, Thanassis, Olson, Loren, et al.
Created Date
2014

Creative design lies at the intersection of novelty and technical feasibility. These objectives can be achieved through cycles of divergence (idea generation) and convergence (idea evaluation) in conceptual design. The focus of this thesis is on the latter aspect. The evaluation may involve any aspect of technical feasibility and may be desired at component, sub-system or full system level. Two issues that are considered in this work are: 1. Information about design ideas is incomplete, informal and sketchy 2. Designers often work at multiple levels; different aspects or subsystems may be at different levels of abstraction Thus, high fidelity analysis …

Contributors
Khorshidi, Maryam, Shah, Jami J, Wu, Teresa, et al.
Created Date
2014

In today’s day and age, the use of automated technology is becoming increasingly prevalent. Throughout the aerospace industry, we see the use of automated systems in manufacturing, testing, and, progressively, in design. This thesis focuses on the idea of automated structural design that can be directly coupled with parametric Computer-Aided Drafting (CAD) and used to support aircraft conceptual design. This idea has been around for many years; however, with the advancement of CAD technology, it is becoming more realistic. Having the ability to input design parameters, analyze the structure, and produce a basic CAD model not only saves time in …

Contributors
Anderson, Benjamin Kyle, Takahashi, Timothy, Bolukbasi, Akif, et al.
Created Date
2017

This report provides an overview of scramjet-powered hypersonic vehicle modeling and control challenges. Such vehicles are characterized by unstable non-minimum phase dynamics with significant coupling and low thrust margins. Recent trends in hypersonic vehicle research are summarized. To illustrate control relevant design issues and tradeoffs, a generic nonlinear 3DOF longitudinal dynamics model capturing aero-elastic-propulsive interactions for wedge-shaped vehicle is used. Limitations of the model are discussed and numerous modifications have been made to address control relevant needs. Two different baseline configurations are examined over a two-stage to orbit ascent trajectory. The report highlights how vehicle level-flight static (trim) and dynamic …

Contributors
Dickeson, Jeffrey James, Rodriguez, Armando A, Tsakalis, Konstantinos, et al.
Created Date
2012

The goal of this research was to contribute to the understanding of how the physical design of Intensive Care Unit (ICU) environments may be improved to enhance nursing communication, and in turn, the quality and safety of patient outcomes. This study was guided by two research questions: (1) What are the major characteristics of nurse communication in a hybrid ICU nurse station design? (2) What are the factors in the built environment that enhance or hinder nurse communication in a hybrid ICU nurse station design? The research design was exploratory and qualitative. Observations were conducted in two ICUs with hybrid …

Contributors
Newcomb, Emily Michelle Darling, Lamb, Gerri, Stein, Morris, et al.
Created Date
2011

In response to the rapid rise of emerging markets, shorter product lifecycles, increasing global exchange and worldwide competition, companies are implementing `sustainable development' as a mechanism by which to maintain competitive global advantage. Sustainable product development approaches used in industry focus mainly on environmental issues, and to a certain extent on social and economic aspects. Unfortunately, companies have often ignored or are unsure of how to deal with the cultural dimensions of sustainable product development. Multi-nationals expanding their business across international boundaries are agents of cultural change and should be cognizant of the impact their products have on local markets. …

Contributors
Dhadphale, Tejas Ravindra, Giard, Jacques, Boradkar, Prasad, et al.
Created Date
2013

Communication networks, both wired and wireless, are expected to have a certain level of fault-tolerance capability.These networks are also expected to ensure a graceful degradation in performance when some of the network components fail. Traditional studies on fault tolerance in communication networks, for the most part, make no assumptions regarding the location of node/link faults, i.e., the faulty nodes and links may be close to each other or far from each other. However, in many real life scenarios, there exists a strong spatial correlation among the faulty nodes and links. Such failures are often encountered in disaster situations, e.g., natural …

Contributors
Banerjee, Sujogya, Sen, Arunabha, Xue, Guoliang, et al.
Created Date
2013

In this work, different passive prosthetic ankles are studied. It is observed that complicated designs increase the cost of production, but simple designs have limited functionality. A new design for a passive prosthetic ankle is presented that is simple to manufacture while having superior functionality. This prosthetic ankle design has two springs: one mimicking Achilles tendon and the other mimicking Anterior-Tibialis tendon. The dynamics of the prosthetic ankle is discussed and simulated using Working model 2D. The simulation results are used to optimize the springs stiffness. Two experiments are conducted using the developed ankle to verify the simulation It is …

Contributors
Bhat, Sandesh Ganapati, Redkar, Sangram, Sugar, Thomas, et al.
Created Date
2017

Digital Fabrication has played a pivotal role in providing reality to industrial designers' ideas since its first commercial use in late 80's. Making the final prototype of a design project has been the initial assumed use for these technologies in the design process. However, new technology advances in this area offer further opportunities for designers. In this research these opportunities have been carefully explored. This research will be conceptualized through discussing the findings of a case study and theories in the areas of Industrial Design methodology, digital fabrication, and design pedagogy. Considering the span of digital fabrication capabilities, this research …

Contributors
Valamanesh, Roozbeh, Shin, Dosun, Velasquez, Joseph, et al.
Created Date
2012

The Autonomous Vehicle (AV), also known as self-driving car, promises to be a game changer for the transportation industry. This technology is predicted to drastically reduce the number of traffic fatalities due to human error [21]. However, road driving at any reasonable speed involves some risks. Therefore, even with high-tech AV algorithms and sophisticated sensors, there may be unavoidable crashes due to imperfection of the AV systems, or unexpected encounters with wildlife, children and pedestrians. Whenever there is a risk involved, there is the need for an ethical decision to be made [33]. While ethical and moral decision-making in humans …

Contributors
Kankam, Immanuella, Berman, Spring, Johnson, Kathryn, et al.
Created Date
2019

All too often, industrial designers face seemingly intractable obstacles as they endeavor to, as Simon (1996, p. 111) describes, devise "courses of action aimed at changing existing situations into preferred ones." These problems, described by Rittel and Webber (1973) as "wicked," are insurmountable due to the contradictory and changing nature of their requirements. I argue that that industrial design (ID) is largely subject to Rittel's quandary because of its penchant for producing single solutions for large populations; such design solutions are bound, in some senses, to fail due to the contradictory and changing nature of large and, thus, inherently diverse …

Contributors
Braiman, Stuart B., Giard, Jacques, Black Jr., John A, et al.
Created Date
2012

The development of literacy abilities in young children has been a major concern for authorities and teachers in the USA for the last two decades. Significant effort has been devoted to ensure that preschool settings allow and motivate children to engage in literacy activities before entering kindergarten. Research has found that a rich classroom environment in preschool settings enables teachers to encourage literacy interest in children at a young age. While a large amount of research has concentrated in testing the effect of prescriptive modifications in the classroom environment, few have focused on studying the design process and tools that …

Contributors
Cortes, Catalina, Patel, Mookesh, Heywood, William, et al.
Created Date
2013

Industrial design is the practice of creating solutions by studying people and businesses. Originally centered on development of goods, industrial design uses methods rooted in human behavioral study, human factors, and strategic problem solving. As our economy and professional practice shift away from manufacturing towards a service-dominant landscape, industrial design must align its profession to formally include service design. The small service business setting is a microcosm in which the value of design and branding in business is magnified. This research reinforces design's ties with services marketing and business and is dedicated to finding solutions for the backbone of our …

Contributors
Grimes, Lynelle Marie, Takamura, John, Peck, Sidnee, et al.
Created Date
2012

This thesis gives a detailed design process for a pulsed type thruster. The thrust stand designed in this paper is for a Pulsed Plasma Thruster built by Sun Devil Satellite Laboratory, a student organization at Arizona State University. The thrust stand uses a torsional beam rotating to record displacement. This information, along with impulse-momentum theorem is applied to find the impulse bit of the thruster, which varies largely from other designs which focus on using the natural dynamics their fixtures. The target impulse to record on this fixture was estimated to be 275 μN-s of impulse. Through calibration and experimentation, …

Contributors
Verbin, Andrew Joseph, Takahashi, Timothy T, White, Daniel B, et al.
Created Date
2017

The main aim of this thesis is to study the Saudi Arabia designers level of awareness about sustainable interior materials and to what extent are Saudi Arabia designers specifying sustainable interior materials in their interior designs? The problem statement relies on understanding how does this may impact the Saudi Arabia environment. In order to comply with these objectives, a telephone interviews were built, to test the designer’s knowledge about sustainable interior materials. The results showed that the Saudi Arabia interior designers are not fully aware of sustainable interior materials and there is a lack of interest in applying sustainable interior …

Contributors
alotibi, arig, Bender, Diane, Takamura, John, et al.
Created Date
2019

The aim of this study is to conduct the empirical tests on consumer's emotional responses of product design and the relationship between emotion and consumer's attitudinal loyalty to identify if there exists potential relationship links between these two factors together by following certain regulation. This study also seeks to compare Brand Loyalty of Apple products across two different cultures - China and US to see if there are any differences regarding their brand loyalty construction and expression. The emotional responses on product design were also studied in order to reveal potential emotional design issues between the two different cultures. Results …

Contributors
Qu, Yonghao, Takamura, John, Shin, Dosun, et al.
Created Date
2012

According to the ADA (American Diabetes Association), diabetes mellitus is one of the chronic diseases with the highest mortality rate. In the US, 25 million are known diabetics, which may double in the next decade, and another seven million are undiagnosed. Among these patients, older adults are a very special group with varying physical capabilities, cognitive functions and life expectancies. Because they run an increased risk for geriatric conditions, Type 2 diabetes treatments for them must be both realistic and systematic. In fact, some researchers have explored older adults’ experiences of diabetes, and how they manage their diabetes with new …

Contributors
Lu, Chenyang, Takamura, John, Herring, Donald, et al.
Created Date
2017

This dissertation focuses on lighting and the dining experience as an experiential phenomenon at upscale restaurant setting. The aim is to better the understanding of the impact of lighting on upscale dining experiences, on a global scale. In addition, special emphasis was given to understand the theatrical approach of lighting in staging the dining experience. This research follows a sequential exploratory, mixed-methods approach, which consisted of a qualitative phase, followed by a quantitative phase. The qualitative phase gathered data in the form of interviews and observations, which was then analyzed using thematic analysis. The second phase involved creating a measure …

Contributors
Alsharhan, Dalal, Kroelinger, Michael, Margolis, Eric, et al.
Created Date
2017

This study explores the processes of designing strategies. The context of this research is scoped to the direct-marketing activities of small farm operators in eastern Iowa. The research intent is to explore and articulate trends in decision-making processes that assist small farm operators in eastern Iowa with direct marketing farm-to-table products, to explore and articulate how the design process creates differentiated value, and to explore and articulate the relationship between the design process and the way that small farm operators in eastern Iowa conceptualize their direct-marketing strategies. The research design takes a post-positivist approach and uses a grounded theory methodology. …

Contributors
Larew, Hart, Brooks, Kenneth R., Cheng, Chingwen, et al.
Created Date
2019

Advances in technology are fueling a movement toward ubiquity for beyond-the-desktop systems. Novel interaction modalities, such as free space or full body gestures are becoming more common, as demonstrated by the rise of systems such as the Microsoft Kinect. However, much of the interaction design research for such systems is still focused on desktop and touch interactions. Current thinking in free-space gestures are limited in capability and imagination and most gesture studies have not attempted to identify gestures appropriate for public walk-up-and-use applications. A walk-up-and-use display must be discoverable, such that first-time users can use the system without any training, …

Contributors
Danielescu, Lavinia Andreea, Walker, Erin A, Burleson, Winslow, et al.
Created Date
2019

This paper describes an effort to bring wing structural stiffness and aeroelastic considerations early in the conceptual design process with an automated tool. Stiffness and aeroelasticity can be well represented with a stochastic model during conceptual design because of the high level of uncertainty and variability in wing non-structural mass such as fuel loading and control surfaces. To accomplish this, an improvement is made to existing design tools utilizing rule based automated design to generate wing torque box geometry from a specific wing outer mold-line. Simple analysis on deflection and inferred stiffness shows how early conceptual design choices can strongly …

Contributors
Miskin, Daniel L, Takahashi, Timothy T, Mignolet, Marc, et al.
Created Date
2018

Eat Your Heart Out is a visually rich qualitative ethnic food research that examines consumption, production, and distribution practices transnationally. Through the example of Mumbai’s street foods, the study aims to discover how design participates in fashioning the street food experiences locally and globally. Food is an important cultural artifact in the world. However, past research in design suggests that the discipline has mainly focused on food as a catalyst for creativity and imagination or as a tool to examine materialistic, economical, sensorial, and emotional connections. Studying the user-focused involvement in the creation of food artifacts and focusing on cultural, …

Contributors
Zunjarwad, Renu Madhav, Margolis, Eric, Boradkar, Prasad, et al.
Created Date
2018

The artificial lighting plays crucial role in the human life in the contemporary, globalized and highly complex world. Its influence on the physical and psychological health of the humans was studied by numerous reputable scholars from across the globe, however this study focuses on the impact of light on the college students living in the dormitories. The study seeks to find whether there is a correlation between light and health of the student, his/her performance, productivity, mood and feelings. The paper uses a relatively new housing near Arizona State University Tempe-campus as a case study as an attempt to substantiate …

Contributors
Alaboudi, Noof, Brunner, Lori, Bernardi, Jose, et al.
Created Date
2019

The process of this study involves conducting empirical tests on consumer's emotional responses toward tableware designs by statistic measurements (PrEmo), including both Chinese and American cultures. The objective to this study is to research the correlation between consumers' cognitive analysis of Chinese tableware designs and their emotional responses. The author proposes that the correlationship between consumers' cognition of Chinese tableware and emotional responses will lead to a new opportunity in the industrial design industry. Fifty-seven people responded to sixty-seven invitations to join the research project at Chinese restaurants in both China and America. Throughout the process of coding and organizing …

Contributors
Liu, Ran, Herring, Donald, Wolf, Peter, et al.
Created Date
2013

Perpetual Pavements, if properly designed and rehabilitated, it can last longer than 50 years without major structural rehabilitation. Fatigue endurance limit is a key parameter for designing perpetual pavements to mitigate bottom-up fatigue cracking. The endurance limit has not been implemented in the Mechanistic Empirical Pavement Design Guide software, currently known as DARWin-ME. This study was conducted as part of the National Cooperative Highway Research Program (NCHRP) Project 9-44A to develop a framework and mathematical methodology to determine the fatigue endurance limit using the uniaxial fatigue test. In this procedure, the endurance limit is defined as the allowable tensile strains …

Contributors
Zeiada, Waleed Abdelaziz Mohammed, Kaloush, Kamil E, Witczak, Matthew W, et al.
Created Date
2012

Engineering ethics is preoccupied with technical failure. To ameliorate the risk that engineering works might either blow up or fall down, the engineering code of ethics provides guidance of how engineers should conduct themselves. For example, the Fundamental Canons in the National Society of Professional Engineers code of ethics states that engineers should hold paramount the health, safety and welfare of the public. As a result, engineering designs meet basic human needs such as food, water and shelter -- at risks that are generally considered acceptable. However, even safe designs fail to meet our needs ranked higher in Maslow's hierarchy …

Contributors
Vortherms, Kaitlin Sarah, Seager, Thomas, Tracy, Sarah, et al.
Created Date
2016

A growing body of research shows that characteristics of the built environment in healthcare facilities impact patients' well-being. Research findings suggest that patients form judgments of perceived quality care based on environmental characteristics. Patient outcomes and ratings of quality of care are linked to the environments' ability to reduce patient stress as well as influence perceptions of quality of care. Historically, this research has been focused in the hospital environment. The United States healthcare system heavily relies on hospitals to treat (rather than prevent) illness, leading to a high per capita healthcare expenditure. Currently, this healthcare system is shifting to …

Contributors
Badura, Kerri Christina, Lamb, Gerri, Heywood, William, et al.
Created Date
2012

Social media sites focusing on health-related topics are rapidly gaining popularity among online health consumers, also known as "e-patients". The increasing adoption of social media by e-patients and their demand for reliable health information has prompted several health care organizations (HCOs) to establish their social media presence. HCOs are using social media to connect with current and potential e-patients, and improve patient education and overall quality of care. A significant benefit for HCOs in using social media could potentially be the improvement of their quality of care, as perceived by patients. Perceived quality of care is a key determinant of …

Contributors
Admane, Leena, Kroelinger, Michael D, Cheong, Pauline Hope, et al.
Created Date
2011

Game design and product design are natural partners. They use similar tools. They reach the same users. They even share the same goal: to provide great user experiences. This thesis asks, "Can game design build better product learning experiences, and if so, how?" It examines the learning situations created by and necessary for product design. It examines the principles of game learning. Then it looks for opportunities to apply game learning principles to product learning situations. The goal is to create engaging and successful product learning experiences, without turning products into games. This study uses an auto-ethnographic evaluation of a …

Contributors
Reeves, James Scott, Boradkar, Prasad, Gee, Elisabeth, et al.
Created Date
2016

Essential knowledge of Co-continuous composite material properties are explored in this thesis. Mechanical characterization of these materials gives a detailed outlook to use them in design, manufacture and tailor make the products. Soft and hard polymer materials have extensive properties individually, but when combined to make a single structure, they give an exceptional combination of properties. In this study, Polymer materials used are in the form of Co-Continuous structures (i.e., both soft and hard polymers are continuous throughout the microstructure) fabricated into several microstructures namely, Simple Cubic (SC), Body-Centered Cubic (BCC) and Face Centered Cubic (FCC) shapes. An experimental process …

Contributors
VARAKANTHAM, MADHAVA REDDY, Yongming, Liu, Patel, Jay, et al.
Created Date
2019

Research in design, emotion, and product experience has focused on establishing a connection between the aesthetic qualities of products and emotions. Studies in product expression have demonstrated relevant patterns between aesthetics and spatial reasoning. In design research, fully understanding latent qualities of consumers assists in developing an immersive product experience which in turn can engender a lasting product relationship. This study evaluates how people interpret the emotionality of form in order to establish a veritable method for interpreting emotional variables in 3D objects. This research assesses the emotional perception of aesthetic values in 2D and 3D teapots. A teapot image …

Contributors
Horner, Candace K., Takamura, John, McDermott, Lauren, et al.
Created Date
2014