ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at firstname.lastname@example.org.
- 3 English
- 3 Public
- 3 Alternative energy
- 1 ANOVA
- 1 Angle of incidence
- 1 Degradation
- 1 Energy
- 1 FMECA
- 1 IEC 60891
- 1 IEC 61853
- 1 PVsyst
- 1 Performance
- 1 Photovoltaics
- 1 RPN
- 1 Soiling in PV
- 1 Solar
- 1 Traslation Procedures
- 1 Two Axis Tracker
- 1 temperature distribution within a PV module
- 1 temperature variation across the modules in a power plant
- 1 thermal model coefficients
- 1 thermal non-uniformity
This is a two-part thesis: Part 1 characterizes soiling losses using various techniques to understand the effect of soiling on photovoltaic modules. The higher the angle of incidence (AOI), the lower will be the photovoltaic (PV) module performance. Our research group has already reported the AOI investigation for cleaned modules of five different technologies with air/glass interface. However, the modules that are installed in the field would invariably develop a soil layer with varying thickness depending on the site condition, rainfall and tilt angle. The soiled module will have the air/soil/glass interface rather than air/glass interface. This study investigates the …
- Boppana, Sravanthi, Tamizhmani, Govindasamy, Srinivasan, Devarajan, et al.
- Created Date
Photovoltaic (PV) modules are typically rated at three test conditions: STC (standard test conditions), NOCT (nominal operating cell temperature) and Low E (low irradiance). The current thesis deals with the power rating of PV modules at twenty-three test conditions as per the recent International Electrotechnical Commission (IEC) standard of IEC 61853 – 1. In the current research, an automation software tool developed by a previous researcher of ASU – PRL (ASU Photovoltaic Reliability Laboratory) is validated at various stages. Also in the current research, the power rating of PV modules for four different manufacturers is carried out according to IEC …
- Vemula, Meena Gupta, Tamizhmani, Govindasamy, Macia, Narcio F., et al.
- Created Date
The operating temperature of photovoltaic (PV) modules is affected by external factors such as irradiance, wind speed and ambient temperature as well as internal factors like material properties and design properties. These factors can make a difference in the operating temperatures between cells within a module and between modules within a plant. This is a three-part thesis. Part 1 investigates the behavior of temperature distribution of PV cells within a module through outdoor temperature monitoring under various operating conditions (Pmax, Voc and Isc) and examines deviation in the temperature coefficient values pertaining to this temperature variation. ANOVA, a statistical tool, …
- PAVGI, ASHWINI, Tamizhmani, Govindasamy, Phelan, Patrick, et al.
- Created Date