Skip to main content

ASU Electronic Theses and Dissertations


This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.

In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.

Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.


Language
  • English
Status
  • Public
Subject
Date Range
2010 2020


The traditional access control system suffers from the problem of separation of data ownership and management. It poses data security issues in application scenarios such as cloud computing and blockchain where the data owners either do not trust the data storage provider or even do not know who would have access to their data once they are appended to the chain. In these scenarios, the data owner actually loses control of the data once they are uploaded to the outside storage. Encryption-before-uploading is the way to solve this issue, however traditional encryption schemes such as AES, RSA, ECC, bring about …

Contributors
Dong, Qiuxiang, Huang, Dijiang, Sen, Arunabha, et al.
Created Date
2020

The applications utilizing nanoparticles have grown in both industrial and academic areas because of the very large surface area to volume ratios of these particles. One of the best ways to process and control these nanoparticles is fluidization. In this work, a new microjet and vibration assisted (MVA) fluidized bed system was developed in order to fluidize nanoparticles. The system was tested and the parameters optimized using two commercially available TiO2 nanoparticles: P25 and P90. The fluidization quality was assessed by determining the non-dimensional bed height as well as the non-dimensional pressure drop. The non-dimensional bed height for the nanosized …

Contributors
an, keju, Andino, Jean, Phelan, Patrick, et al.
Created Date
2019

This research summarizes the characterization of the constituent materials of a unidirectional composite for use in a finite element model. Specifically the T800s-F3900 composite from Toray Composites, Seattle, WA. Testing was carried out on cured polymer matrix provided by the manufacturer and single fiber specimen. The material model chosen for the polymer matrix was MAT 187 (Semi-Analytical Model for Polymers) which allowed for input of the tension, compression, and shear load responses. The matrix was tested in tension, compression, and shear and was assumed to be isotropic. Ultimate strengths of the matrix were found to be 10 580 psi in …

Contributors
Robbins, Joshua, Rajan, Subramaniam, Mobasher, Barzin, et al.
Created Date
2019

Research findings have shown that many computerized maintenance management systems (CMMS) are largely underutilized, often leading to the loss of efficiencies in the organization’s maintenance program. A literature review is presented of the available research in CMMS and of operations and management roles in a maintenance program. In addition, research was conducted around CMMS users to identify if any misalignments exist between management and operations. The articles selected for review offer a variety of perspectives, considerations, instructions, and noted failures involved with implementation, day to day use and reporting expectations. Through conducting a survey of both management and operations this …

Contributors
Rennert, Andrew William, Sullivan, Kenneth, Stone, Brian, et al.
Created Date
2019

The goal of any solar photovoltaic (PV) system is to generate maximum energy throughout its lifetime. The parameters that can affect PV module power output include: solar irradiance, temperature, soil accumulation, shading, encapsulant browning, encapsulant delamination, series resistance increase due to solder bond degradation and corrosion and shunt resistance decrease due to potential induced degradation, etc. Several PV modules together in series makes up a string, and in a power plant there are a number of these strings in parallel which can be referred to as an array. Ideally, PV modules in a string should be identically matched to attain …

Contributors
Tahghighi, Arash, Tamizhmani, Govindasamy, Rogers, Bradley, et al.
Created Date
2019

Readout Integrated Circuits(ROICs) are important components of infrared(IR) imag ing systems. Performance of ROICs affect the quality of images obtained from IR imaging systems. Contemporary infrared imaging applications demand ROICs that can support large dynamic range, high frame rate, high output data rate, at low cost, size and power. Some of these applications are military surveillance, remote sensing in space and earth science missions and medical diagnosis. This work focuses on developing a ROIC unit cell prototype for National Aeronautics and Space Ad ministration(NASA), Jet Propulsion Laboratory’s(JPL’s) space applications. These space applications also demand high sensitivity, longer integration times(large well …

Contributors
Praveen, Subramanya Chilukuri, Bakkaloglu, Bertan, Kitchen, Jennifer, et al.
Created Date
2019

This work introduces self-organizing techniques to reduce the complexity and burden of coordinating distributed energy resources (DERs) and microgrids that are rapidly increasing in scale globally. Technical and financial evaluations completed for power customers and for utilities identify how disruptions are occurring in conventional energy business models. Analyses completed for Chicago, Seattle, and Phoenix demonstrate site-specific and generalizable findings. Results indicate that net metering had a significant effect on the optimal amount of solar photovoltaics (PV) for households to install and how utilities could recover lost revenue through increasing energy rates or monthly fees. System-wide ramp rate requirements also increased …

Contributors
Janko, Samantha Ariel, Johnson, Nathan, Zhang, Wenlong, et al.
Created Date
2019

A literature search revealed that previous research on the Attentional Blink (AB) has not examined the role of salience in AB results. I examined how salience affects the AB through multiple forms and degrees of salience in target 1 (T1) and target 2 (T2) stimuli. When examining increased size as a form of salience, results showed a more salient T2 increased recall, attenuating the AB. A more salient T1 did not differ from the control, suggesting the salience (increased size) of T2 is an important factor in the AB, while salience (increased size) of T1 does not affect the AB. …

Contributors
Lafko, Stacie, Becker, Vaughn, Branaghan, Russell, et al.
Created Date
2019

Vehicles traverse granular media through complex reactions with large numbers of small particles. Many approaches rely on empirical trends derived from wheeled vehicles in well-characterized media. However, the environments of numerous bodies such as Mars or the moon are primarily composed of fines called regolith which require different design considerations. This dissertation discusses research aimed at understanding the role and function of empirical, computational, and theoretical granular physics approaches as they apply to helical geometries, their envelope of applicability, and the development of new laws. First, a static Archimedes screw submerged in granular material (glass beads) is analyzed using two …

Contributors
Thoesen, Andrew Lawrence, Marvi, Hamidreza, Berman, Spring, et al.
Created Date
2019

As the microelectronics industry continues to decrease the size of solder joints, each joint will have to carry a greater current density, making atom diffusion due to current flow, electromigration (EM), a problem of ever-increasing severity. The rate of EM damage depends on current density, operating temperature, and the original microstructure of the solder joint, including void volume, grain orientation, and grain size. While numerous studies have investigated the post-mortem effects of EM and have tested a range of current densities and temperatures, none have been able to analyze how the same joint evolves from its initial to final microstructure. …

Contributors
Branch Kelly, Marion, Chawla, Nikhilesh, Ankit, Kumar, et al.
Created Date
2019